- Overview
- How does it work?
- Advantages
- Specification
- Application and Case
- Important Notes
- FAQ
- Recommended Products
The JINGYANG HLMW-100/150 multi wire saw machine employs a double column gantry structure and a rope feed method. Using 0.3–1 mm ultra fine diamond wires in parallel, it can cut large marble or granite blocks into multiple slabs in a single operation.

Cutting Logic: Multiple ultra fine diamond wires are arranged in parallel and pressed into the block from top to bottom, dividing a marble or granite block into multiple slabs.
Cutting Results: Multi wire parallel cutting with a kerf of 0.5–0.7 mm and a maximum yield of 97%. It also supports the production of ultra thin slabs up to 10 mm thick.
Hardware Configuration: Servo tension control system, n type heavy duty structure, supporting continuous and stable mass production, ensuring consistent flatness and surface quality of ultra thin slabs.
Comprehensive Benefits:Slab flatness improved by 50%, stone dust emissions reduced by over 90%, operating below 90 dB, helping processing plants shorten their return on investment cycle.
How Does the Multi Wire Saw Machine Process Stone Blocks?
The HLMW-100/150 multi wire saw layout changes the traditional single wire machine's cutting rhythm, which can only complete one cut at a time.
Cutting method: Multiple diamond wires press down in parallel to cut multiple pieces in one go, suitable for mass production of slabs from large blocks of raw material.

Verify that your equipment is compatible with the specifications of the raw blocks to be processed in your factory:
Parameter Items |
Specification |
Max. size of raw blocks |
3600×2000×2100 mm |
Max. cutting length |
3600 mm |
Max. cutting height |
2000 mm |
For marble and granite processing manufacturers, the following factors need to be considered in the cutting plan:
✔ Block size
✔ Required slab thickness
✔ Wire saw diameter
✔ Stone characteristics.
These factors will affect the number of qualified slabs that can be produced from a single block, the cutting time, and subsequent finishing requirements.
Diamond Wire Configuration and Cutting Kerf
Wire saw diameter and cutting kerf are two distinct measurement parameters, which is where the differences between diamond wire block cutting machines lie.
Wire Diameter: The physical diameter of the diamond wire itself, standard configuration is 0.55mm diamond wire, optional configuration is 0.3–1 mm.
Kerf: The width of the actual material removed during cutting; 0.5–0.7mm cutting kerf.
Features:
01. Narrower cutting paths reduce the amount of stone removed between adjacent slabs.
02. Less cutting vibration to prevent edge breakage; this machine can produce ultra thin slabs less than 10mm thick.
03. Yield 97%.
04. Stone dust emission reduction 90%.
Note: These values are for product performance reference only. Actual yield depends on stone composition, block condition, target slab thickness, wire saw selection, and cutting arrangement



Servo Controlled Wire Tension and Feed Adjustment
When multiple diamond wires operate synchronously in parallel, uneven tension directly alters the processing state of the cutting path, causing thickness deviations and wire marks. The tension control parameters of the HLMW-100/150 are the core of the control system for this thin diamond wire multi wire saw machine.
Control Items |
Calibration parameters |
Rope tension range |
200–500 N |
Tension adjustment accuracy |
±10 N |
Max. operating linear speed |
20–30 m/s |
Downward feed rate |
100–250 mm/h |

Tension is controlled by a servo system, and the cutting feed employs a dual axis linkage ball screw structure with adjustable servo driven feed speed.
For factories evaluating multi wire saw for granite solutions, feed parameters can be adjusted according to the cutting plan and stone conditions. These parameters need to be set in accordance with the selected wire saw diameter and stone type.
Machine Frame and Mechanical Structure
The n type structure is strongly fixed to the foundation with two columns and equipped with linear sliders to ensure stable operation and minimal structural deformation.

Contents that need to be checked in advance for the installation plan | |
Equipment dimensions |
10160×4800×7445 mm |
Please check before shipping. |
✔ Final installation drawings confirm foundation conditions ✔ Maintenance access ✔ Material transfer routes ✔ Surrounding space of the workshop |

HLMW-100/150 Multi Wire Saw Machine Specifications
Parameter |
Specification |
model |
HLMW-100/150 |
Diamond rope diameter |
0.3–1 mm |
Maximum storage capacity |
40 km |
Maximum operating line speed |
20–30 m/s |
Downward feed rate |
100–250 mm/h |
Max. spindle speed |
1500 rpm |
Spindle cooling |
oil cooling |
Main motor power |
60 kw |
Lifting method |
Line pressing down |
Gross Power by Configuration
Configuration |
Gross Power |
High Tension, 2 Groups |
500 kw |
Low Tension, 2 Groups |
370 kw |
High Tension, 1 Group |
380 kw |
Low Tension, 1 Group |
315 kw |
The total power of the unit varies depending on the selected tension type and the number of units. The final applicable electrical configuration needs to be confirmed in the technical quotation.
Slab Thickness and Production Applications
The slab thickness is rated for 5–60 mm, allowing for the production of ultra thin slabs up to 10 mm thick. It can also process regular natural stone slabs; however, this capability depends on the specific application.
HLMW-100/150 is suitable for the following production scenarios:
1. Marble Processing Plants
2. Granite Slab Manufacturers
3. Large Scale Stone Processing Facilities




Customer case


HLMW-100/150 multi wire saw machine has been deployed in the customer’s stone processing plant.


HLMW Multi wire Saw, Customer Actual Operation On-site Display


What Should Be Confirmed Before Selecting a Multi Wire Saw?
Before purchasing a multi wire saw machine for stone block cutting, the purchaser needs to provide relevant information to ensure that the equipment configuration matches their production needs.
• Stone material: Specify marble or granite and provide details of the material's hardness and condition.
• Block dimensions: Confirm the maximum block length, width and height against the machine's processing limits.
• Target slab thickness: Identify the required thickness range, including whether production below 10 mm is needed.
• Diamond wire selection: Review the available 0.3–1 mm range and determine whether a 0.55 mm configuration is appropriate.
• Production requirements: Provide the expected cutting schedule and slab specifications.
• Electrical configuration: Confirm the required high tension or low tension group arrangement and the corresponding gross power.
• Workshop layout: Check the machine dimensions, foundation requirements, lifting access and maintenance clearance

Providing these details at the quotation stage helps the technical team evaluate the appropriate wire setup, power configuration and installation arrangement.

What materials can the HLMW-100/150 multi wire saw machine process?
Marble and granite blocks.
What diameters of diamond wire saws are available?
Available diameters range from 0.3 to 1 mm. A 0.55 mm diamond wire saw is standard. The final selection depends on the type of stone, the thickness of the target slab, and the working conditions.
What slab thickness can the machine produce?
Laticle width: 0.5–0.7 mm. The actual slab width needs to be measured and confirmed under the selected wire saw and corresponding stone conditions. The wire saw diameter and slab width are not equivalent.
What is the maximum size of the blocks that can be processed?
3600×2000×2100 mm. The blocks must be placed within the stroke range.
What thickness of slabs can it process?
5–60 mm, supporting slabs thinner than 10 mm. For specific ultra thin slab orders, the stone, wire assembly, and process need to be reviewed before production.
How is wire tension controlled?
Servo tension control, range 200–500 N, accuracy ±10 N. The set value is determined according to the rope and the working conditions of the stone.
Request a Technical Configuration for Your Stone Blocks
When selecting a multi wire saw machine, don't just look at the maximum block size. Any deviation in wire diameter, kerf, target slab thickness, tension setting, or power distribution scheme will affect the machine's compatibility with your production line.
We welcome you to provide JINGYANG with your stone type, maximum block size, and target slab thickness! Our team will configure the HLMW-100/150 and provide a technical solution based on your production needs.